Home » Corrugated Metal Roofing and Siding Products » Sinewave 2.67″ X 3/4″

Sinewave 2.67″ X 3/4″

Corrugated Metals, Inc.’s Sinewave industrial roofing and siding products are the standard patterns for the industry. They provide improved strength in the materials and are easy to install and economical to use. The most common uses are industrial, commercial and architectural applications. These products offer a rib pattern of 2.67” centers and a depth of 1⁄2”, 3⁄4”, or 7/8”.

Notes

  1. Roof loads are for positive loads only and are in addition to weight of panel.
  2. Other gauges of steel and aluminum are available upon inquiry.
  3. Maximum allowable stress for Grade A (F) = 20,000 PSI for roofs and 26,667 PSI for walls where wind is the only load.
  4. Loads and spans for carbon steel are based on the AISI Cold Formed Steel Design Manual.
  5. Other gauges of steel may be available upon inquiry.
  1. Roof loads are for positive loads only and are in addition to weight
    of panel.
  2. Other gauges of steel and aluminum are available upon inquiry.
  3. Maximum allowable stress (FC) = 15,000 PSI, (FT) = 17,000 PSI for
    roof and side wall. Stresses have been increased 1/3 for wind loading.
  4. Loads and spans for aluminum are based on Aluminum Formed Sheet
    Building Sheathing Design Guide.

Resources

PRODUCT CHARACTERISTICS

METAL OVERALL
WIDTH		 FINISH NET COVERAGE EDGES AVAILABILITY
SIDING ROOFING
Steel & Aluminum 41 3/4“ SE/MF 40″ 37 1/3“ 2 Down Standard

Have questions?

Please fill out the form to contact us or call us at 1-800-621-5617.