Home » Products » Sinewave 2.67” X 7/8”

Notes

  1. Roof loads are for positive loads only and are in addition to weight of panel.
  2. Other gauges of steel and aluminum are available upon inquiry.
  3. Maximum allowable stress for Grade A (F) = 20,000 PSI for roofs and 26,667 PSI for walls where wind is the only load.
  4. Loads and spans for carbon steel are based on the AISI Cold Formed Steel Design Manual.
  5. Other gauges of steel may be available upon inquiry.
  1. Roof loads are for positive loads only and are in addition to weight of panel.
  2. Other gauges of steel and aluminum are available upon inquiry.
  3. Maximum allowable stress (FC) = 15,000 PSI, (FT) = 17,000 PSI for roof and side wall. Stresses have been increased 1/3 for wind loading.
  4. Loads and spans for aluminum are based on Aluminum Formed Sheet Building Sheathing Design Guide.

Resources

CAD Files
Data Sheet
Load Table
Full Color Chart

PRODUCT CHARACTERISTICS

METAL OVERALL WIDTH FINISH NET COVERAGE EDGES AVAILABILITY
SIDING ROOFING
Steel 24 1/4“ G-90 21 1/3“ 21 1/3“ 1 U/D Special Request
29 3/4“ G-90 26 2/3“ 26 2/3“ 1 U/D Special Request
36 1/4“ G-90 34 2/3“ 32″ 2 Down Special Request
39 1/8“ G-90 37 1/3“ 34 2/3“ 2 Down Standard
44 1/2“ G-90 42 2/3“ 40″ 2 Down Special Request
Aluminum 29 3/4“ MF/SE 26 2/3“ 26 2/3“ 1 U/D Special Request
33 3/4“ MF/SE 32″ 29 1/3“ 2 Down Special Request
35″ MF/SE 32″ 32″ 1 U/D Special Request
39 1/8“ MF/SE 371/3“ 34 2/3“ 2 Down Standard
40 1/2“ MF/SE 37 1/3“ 37 1/3“ 1 U/D Special Request
47″ MF/SE 45 1/3“ 42 2/3“ 2 Down Standard
48 1/3“ MF/SE 45 1/3“ 45 1/3“ 1 U/D Special Request
51 1/2“ SE 48″ 48″ 1 U/D Special Request

Have questions?

Please fill out the form to contact us or call us at 1-800-621-5617.