Box Beam

Box Beam industrial roofing and siding are commonly used for industrial warehouses and buildings requiring cryogenic/ temperature control. Box Beam is stronger than our 4” Box Rib.

Box Beam

Notes

  1. Roof loads are for positive loads only and are in addition to weight of panel.
  2. Other gauges of steel and aluminum are available upon inquiry.
  3. Maximum allowable stress for Grade A (F) = 20,000 PSI for roofs and 26,667 PSI for walls where wind is the only load.
  4. Loads and spans for carbon steel are based on the AISI Cold Formed Steel Design Manual.
  5. Other gauges of steel may be available upon inquiry.
  1. Roof loads are for positive loads only and are in addition to weight of panel.
  2. Other gauges of steel and aluminum are available upon inquiry.
  3. Maximum allowable stress (FC) = 15,000 PSI, (FT) = 17,000 PSI for roof and side wall. Stresses have been increased 1/3 for wind loading.
  4. Loads and spans for aluminum are based on Aluminum Formed Sheet Building Sheathing Design Guide.

Resources

LOAD TABLE

PANEL BOX BEAM
LIVE LOAD 20 PSF 30 PSF 40 PSF 50 PSF
SPAN ROOF WALL ROOF WALL ROOF WALL ROOF WALL
18
301 lbs/sq
 1 10′-9″ 11′-3″ 9′-7″ 9′-10″ 8′-9″ 8′-11″ 8′-2″ 8′-4″
2 14-5 15-2 12-10 13-3 11-3 12-0 10-1 11-2
3 13-4 13-11 11-9 12-2 10-10 11-1 10-1 10-3
20
233 lbs/sq
 1 9-11 10-3 8-9 8-11 8-0 8-1 7-5 7-7
2 12-11 13-9 10-9 12-0 9-5 10-11 8-5 10-0
3 12-2 12-8 10-9 11-1 9-10 10-0 9-2 9-4
22
196 lbs/sq
 1 9-3 9-6 8-2 8-4 7-6 7-6 6-11 7-0
2 11-6 12-9 9-7 11-2 8-4 9-10 7-6 8-10
3 11-5 11-9 10-0 10-3 9-2 9-4 8-4 8-8
24
161 lbs/sq
 1 8-6 8-8 7-6 7-7 6-10 6-11 6-4 6-5
2 10-0 11-8 8-3 9-9 7-2 8-5 6-5 7-7
3 10-5 10-9 9-2 9-4 8-0 8-6 7-2 7-11
032
65 lbs/sq
 1 8-0 9-0 6-7 7-5 5-9 6-5 5-1 5-9
2 7-9 9-0 6-4 7-5 5-6 6-5 4-11 5-9
3 8-7 10-1 7-1 8-3 6-2 7-2 5-6 6-5
040
81 lbs/sq
 1 9-11 10-4 8-1 9-0 7-1 7-11 6-4 7-1
2 9-6 11-2 7-10 9-2 6-10 7-11 6-1 7-1
3 10-8 12-6 8-9 10-3 7-7 8-10 6-10 7-11
Icon quote

Have questions?

Please fill out the form to contact us or call us at 1-800-621-5617.