 |
|
 |
Corrugated Metals Products:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
  |
Please select one of the links below to view more details about our V-Beam roofing and siding. Or you can contact a Corrugated Metals representative at 1-800-621-5617.
 |
 |
|
|
| PANEL |
V-BEAM |
||||||||
| LIVE LOAD |
|
20 PSF |
30 PSF |
40 PSF |
50 PSF |
||||
|
|
SPAN |
ROOF |
WALL |
ROOF |
WALL |
ROOF |
WALL |
ROOF |
WALL |
|
20 |
1 |
9'-6" |
9'-10" |
8'-5" |
8'-7" |
7'-8" |
7'-10" |
7'-2" |
7'-2" |
| 2 |
11-11 |
13-3 |
9-11 |
11-7 |
8-8 |
10-3 |
7-9 |
9-2 |
|
| 3 |
11-9 |
12-2 |
10-5 |
10-8 |
9-6 |
9-8 |
8-9 |
9-0 |
|
| 22 |
1 |
9-0 |
9-3 |
7-11 |
8-1 |
7-3 |
7-4 |
6-9 |
6-10 |
| 2 |
11-1 |
12-5 |
9-2 |
10-10 |
8-0 |
9-5 |
7-2 |
8-5 |
|
| 3 |
11-2 |
11-6 |
9-10 |
10-0 |
8-11 |
9-1 |
8-0 |
8-5 |
|
|
24 |
1 |
8-5 |
8-8 |
7-5 |
7-6 |
6-9 |
6-10 |
6-4 |
6-4 |
| 2 |
9-11 |
11-7 |
8-2 |
9-8 |
7-2 |
8-5 |
6-5 |
7-6 |
|
| 3 |
10-5 |
10-8 |
9-2 |
9-4 |
8-0 |
8-5 |
7-2 |
7-10 |
|
| 032 |
1 |
9-2 |
9-3 |
8-0 |
8-1 |
7-1 |
7-4 |
6-4 |
6-10 |
| 2 |
9-8 |
11-4 |
7-11 |
9-3 |
6-10 |
8-0 |
6-2 |
7-2 |
|
| 3 |
10-9 |
11-5 |
8-10 |
10-0 |
7-8 |
8-11 |
6-11 |
8-0 |
|
|
040 |
1 |
9-10 |
9-11 |
8-7 |
8-8 |
7-10 |
7-11 |
7-1 |
7-4 |
| 2 |
10-8 |
12-7 |
8-9 |
10-3 |
7-8 |
8-11 |
6-10 |
7-11 |
|
| 3 |
11-11 |
12-3 |
9-10 |
10-9 |
8-6 |
9-9 |
7-8 |
8-11 |
|
-
Roof loads are for positive loads only and are in addition to weight of panel.
-
Siding loads are for positive or negative loading.
-
Maximum allowable stress for Grade A (F) = 20,000 PSI for roofs and 26,667 PSI for walls where wind is only load.
-
Loads and spans for carbon steel are based on AISI Cold Formed Steel Design Manual.
-
Other gauges of steel may be available upon inquiry.
-
Roof loads are for positive loads only and are in addition to weight of panel.
-
Siding loads are for positive or negative loading.
-
Maximum allowable stress (FC) = 15,000 PSI for roof and side wall. Stresses have been increased 1/3 for wind loading.
-
Loads and spans are based on Aluminum Formed Sheet Building Sheathing Design Guide.
If you would like more information about our v-beam industrial roofing and siding or any of our corrugated metal products, please call us at 1-800-621-5617, fill out our contact form or email us at info@corrugated-metals.com.
Sinewave Products | 4"
Box Ribs | 8" Box Ribs | RS-7.2
| Box Beam | V-Beam
Interior Liner Panels | Custom
Forming | Architectural Wall
Panels | Bold Rib
Back to Corrugated Metals Products | Contact
Corrugated Metals | Site Map | Home
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |