Corrugated Metals Products: 2.67″ x 7/8″ Corrugated Roofing and Siding

Our Sinewave industrial roofing and siding products are the standard patterns for the industry. They provide improved strength in the materials and are easy to install and economical to use. The most common uses are industrial, commercial and architectural applications.

You can contact a Corrugated Metals representative at 1-800-621-5617.

2.67x.875

7-8x267_39_1-8 7-8x267_47_1-4















Download our full color chart to see what options are available. Click here to download the PDF.

Product Characteristics

METAL

OVERALL
WIDTHS

FINISH

NET COVERAGE

EDGES

AVAILABILITY

SIDING

ROOFING

Steel

24 1/4

G-90

21 1/3

21 1/3

1 U/D

Special Request

29 3/4

G-90

26 2/3

26 2/3

1 U/D

Special Request

36 1/4

G-90

34 2/3

32″

2 Down

Special Request

39 1/8

G-90

37 1/3

34 2/3

2 Down

Standard

44 1/2

G-90

42 2/3

40″

2 Down

Special Request

METAL

OVERALL
WIDTHS

FINISH

NET COVERAGE

EDGES

AVAILABILITY

SIDING

ROOFING

Aluminum

29 3/4

MF/SE

26 2/3

26 2/3

1 U/D

Special Request

33 3/4

MF/SE

32″

29 1/3

2 Down

Special Request

35″

MF/SE

32″

32″

1 U/D

Special Request

39 1/8

MF/SE

371/3

34 2/3

2 Down

Standard

40 1/2

MF/SE

37 1/3

37 1/3

1 U/D

Special Request

47″

MF/SE

45 1/3

42 2/3

2 Down

Standard

48 1/3

MF/SE

45 1/3

45 1/3

1 U/D

Special Request

51 1/2

SE

48″

48″

1 U/D

Special Request

 

Load Table

Click on the photo below to download our 2.67 x 7/8″ load table.

2.67 x .875 Sinewave Load Table 2-25-16

Notes – Steel

  1. Roof loads are for positive loads only and are in addition to weight
    of panel.
  2. Other gauges of steel and aluminum are available upon inquiry.
  3. Maximum allowable stress for Grade A (F) = 20,000 PSI for roofs
    and 26,667 PSI for walls where wind is the only load.
  4. Loads and spans for carbon steel are based on the AISI Cold Formed
    Steel Design Manual.
  5. Other gauges of steel may be available upon inquiry.

Notes – Aluminum

  1. Roof loads are for positive loads only and are in addition to weight
    of panel.
  2. Other gauges of steel and aluminum are available upon inquiry.
  3. Maximum allowable stress (FC) = 15,000 PSI, (FT) = 17,000 PSI for
    roof and side wall. Stresses have been increased 1/3 for wind loading.
  4. Loads and spans for aluminum are based on Aluminum Formed Sheet
    Building Sheathing Design Guide.

If you would like more information about our Sinewave roofing and siding
or any of our corrugated metal products, please call us at 1-800-621-5617,
fill out our contact form or email us at
info@corrugated-metals.com.